FGUP “LICENSINTORG” presents the latest innovation of “TWIN TRADING” Company, Moscow, Russia
Equipment and technology for drying saw-timber
“TWIN CÏ-30/60” equipment
The partner of FGUP Licensintorg – ZAO “Twin Trading Company” developed and offers to potential buyers a unique industrial equipment for drying saw-timber: “TWIN ÑÏÏ-30/60” machine using a principally new vacuum technologies developed by ZAO “Twin Trading Company”, Moscow, Russia.
The vacuum drying technologies, developed by ZAO “TWIN TRADING” company and realized in “TWIN ÑÏÏ-30/60” equipment can reliably guarantee the following:
- High productivity of drying various types of saw-timber up to predetermined humidity parameters (up to 8-10%).
- Capability to dry saw-timber down to 1,5 – 2%.
- Lower power consumption when drying up to predetermined humidity level (304 times) in comparison with traditional equipment;
- Two times smaller area required to installation of the equipment;
- Residual stress in timber at the end of the drying cycle – up to 1,0-2,0%;
- High efficiency of the process exceeding conventional machines by 5-6 times
- Automated control and monitoring of the process with minimum personnel involvement;
- Meeting all fire and environment safety requirements.
Natural gas is the source of heat energy.
Basic technical characteristics of “TWIN –ÑÏ30/60”
¹ |
Name |
Unit |
Numbers
|
1. |
Entire charging volume |
m3 |
30 |
2. |
Productivity:
for oak
and other wood types |
m3/ day
|
30
60 |
3. |
Initial humidity of timber |
% |
70 – 90 |
4. |
Final humidity of timber |
% |
8 – 10 |
5. |
Nominal power |
kwt |
40 |
6. |
Voltage |
volt |
380 |
7. |
Specific power consumption to remove 1 kg of moisture from timber:
Thermal energy
Electromechanical energy |
Kwt h/kg
kwt h/kg |
0,4
0,22 |
8. |
Basic dimensions:
Occupied area
Maximum height |
m 2
m |
150
3,5 |
- The guarantee period for “TWIN ÑÏÏ” is one year from the moment of putting the equipment into operation, but no more than 2 years from the delivery date (in case of proper storage).
- Service life is no less than 10 years with technical assistance to be rendered by the supplier and routine maintenance of the basic components.
- The duration of manufacture, assembly as well as start and adjustment work is equal to 9 – 12 months.
- The equipment will come completed with passport for the machine, maintenance manual and set of spares.
- The supplier will provide training to the Buyer’s technicians on how to operate the equipment. The scope and order of the training will be agreed separately.
Specific provisions, the dates of manufacture, assembly, adjustment and putting the equipment into operation as well as the cost and order of payments will be discussed by the partners and documented in relative paragraphs of the Contract.
ZAO “TWIN” is ready to answer any questions and perform the activities to delivery and commissioning of “TWIN ÑÏ-30/60” equipment for drying saw-timber.
With all your questions please apply to FGUP “Licensintorg”, “Licensinservice” company.
Victor I.Kirichenko,
Director of “Licensinservice”
Phone: +7 (495) 797 63 60
e-mail: kir@licenz.ru
|
