Equipment for transportation of loose materials

FGUP “LICENSINTORG” presents the latest innovation of “TWIN TRADING” Company, Moscow, Russia

Equipment for transportation of loose materials

The partner of FGUP Licensintorg – ZAO “Twin Trading Company” developed and offers to potential buyers a unique industrial equipment for the transportation of loose materials of various types through small diameter pipelines (20,30,40,50, 76 mm)

The vacuum technologies for the transportation of bulk materials, developed by ZAO “TWIN TRADING” company can allow to potential buyers to solve the problem of transportation of various types of conventionally called “loose” materials through small diameter pipelines along any kind of trajectories. Those materials are:

Cellulose fibers, chips, peat, synthetic materials;
Fertilizer’s granules, sawdust, poultry farms waste, dung;
Grains, various powders, sand, cement, etc.;
Crushed stone, gravel, candies, etc.

The vacuum equipment for the transportation of loose materials through small diameter pipelines - TWIN BT20, TWIN BT 30, TWIN BT-40, TWIN BT-50, TWEIN BT-76. The technical characteristics of the equipment with regard to the type of the material to be transported are mentioned below. This equipment operates on the basis of principally new technologies, developed by ZAO TWIN, has substantial advantages over traditionally used transportation systems and can reliably ensure the following:

More flexible transportation approaches and saving of production areas;
Higher level of pipelines infill (when using pneumatic transportation it is equal to 0,3-0,5, when using traditional vacuum transport it is equal to 0,5-0,7). When using ZAO TWIN technology the parameter amounts to 0,9 and more;
Higher productivity;
Lower air consumption;
No dust and accordingly ecological safety;
Automated control and monitoring with minimum personnel involvement;
Meeting all fire and environment safety requirements.

There is something else that substantially distinguishes “TWIN BT” equipment from currently used transportation systems. This is the possibility during the transportation process to perform such technological operations as drying, moistening, impregnation, etc. (applicable auxiliary devices can be supplied as an option).

Below you will find technical characteristics of TWIN BT machinery for various types of loose materials.

Technical characteristics of “TWIN ВТ” equipment
For the transportation of cellulose fibers, chips, peat and synthetic materials

Table 1.

№	Name of parameter	Unit.	Numbers
№	Name of parameter	Unit.	ВТ-20	ВТ-30	ВТ-40	ВТ-50	ВТ-76
1.	Pipeline diam:
	Ferrous metals	mm	24/2	34/2	45/2	54/2	80/2
	Stainless steel	mm	24/2	34/2	45/2	54/2	85/3
2.	Productivity	t/hour	5	10	20	30	50
3.	Transportation distance	m	50	75	100	150	200
4.	Transportation height	m	10	20	30	50	75
5.	Overlap with heating		+	+	+	+	+
6.	Overlap with drying		+	+	+	+	+
7.	Overlap with blending		+	+	+	+	+
8.	Static electricity elimination		+	+	+	+	+
9.	Fire and explosion safe		+	+	+	+	+
10.	Nominal power	kwt	40	50	60	70	100
11.	Voltage	volts	380	380	380	380	380
12.	Mass of equipment	t	5	8	10	15	25
13.	Basic dimensions : Occupied area height width length	m² m m m	10 4 2,5 4	15 4 2,5 5	20 4 3 7	30 4 4 7,5	50 4 5 10

Technical characteristics of “ ТВИН ВТ” equipment for the transportation of fertilizer granules, chips, poultry waste, dunk

Table 2.

№	Name of parameter	Unit.	Numbers
№	Name of parameter	Unit.	ВТ-20	ВТ-30	ВТ-40	ВТ-50	ВТ-76
1.	Pipeline diam.:
	Ferrous metal	mm	24/2	34/2	45/2	54/2	80/2
	Stainless steel	mm	24/2	34/2	45/2	54/2	85/3
2.	Productivity	t/hour	-	10	20	30	50
3.	Transportation distance	m	-	50	100	150	180
4.	Transportation height	m	-	15	25	35	40
5.	Overlap with heating		-	+	+	+	+
6.	Overlap with drying		-	+	+	+	+
7.	Overlap with blending		-	+	+	+	+
8.	Static electricity elimination		-	+	+	+	+
9.	Fire and explosion safe		-	+	+	+	+
10.	Nominal power	kwt	-	60	60	70	100
11.	Nominal voltage	volts	-	380	380	380	380
12.	Mass of equipment	t	-	8	10	15	25
13.	Basic dimensions: Occupied area height width length	m ² m m m	- - - - -	15 4 2,5 5	20 4 3 7	30 4 4 7,5	50 4 5 10

Technical characteristics of “ТВИН ВТ” equipment for transportation of grain, powder, sand, cement

Table 3.

№	Name of parameter	Unit	Number
№	Name of parameter	Unit	ВТ-20	ВТ-30	ВТ-40	ВТ-50	ВТ-76
1.	Pipeline diam:
	Ferrous metal	mm	24/2	34/2	45/2	54/2	80/2
	Stainless steel	mm	24/2	34/2	45/2	54/2	85/3
2.	Productivity	t/hour	10	20	40	80	100
3.	Transportation distance	m	30	50	100	150	200
4.	Height of transportation	m	10	20	30	40	50
5.	Overlap with heating		+	+	+	+	+
6.	Overlap with drying		+	+	+	+	+
7.	Overlap with blending		+	+	+	+	+
8.	Static electricity elimination		+	+	+	+	+
9.	Fire and explosion safe		+	+	+	+	+
10.	Nominal power	kwt	60	60	70	70	100
11.	Voltage	volts	380	380	380	380	380
12.	Mass of equipment	t	5	8	10	15	25
13.	Basic dimensions: Occupied area Height Width Length	m ² m m m	10 4 2,5 4	15 4 2,5 5	20 4 3 7	30 4 4 7,5	50 4 5 10

Technical characteristics of “ТВИН ВТ”machinery for transportation of crushed stone, gravel, candies

Table 4.

№	Name of parameters	Unit.	Numbers
№	Name of parameters	Unit.	ВТ-20	ВТ-30	ВТ-40	ВТ-50	ВТ-76
1.	Pipeline diameter:
	Ferrous metal	mm	24/2	34/2	45/2	54/2	80/2
	Stainless steel	mm	24/2	34/2	45/2	54/2	85/3
2.	Productivity	t/hour	-	-	50	75	100
3.	Distance of transportation	m	-	-	100	150	180
4.	Height of transportation	m	-	-	30	30	50
5.	Overlap with heating		-	-	+	+	+
6.	Overlap with drying		-	-	+	+	+
7.	Overlap with blending		-	-	+	+	+
8.	Static electricity elimination		-	-	+	+	+
9.	Explosion safe		-	-	+	+	+
10.	Nominal power	KWT	-	-	60	80	100
11.	Voltage	Volts	-	-	380	380	380
12.	Mass of equipment	t	-	-	10	15	25
13.	Basic dimensions: Occupied area height width length	m ² m m m	-	-	25 4 4 7	35 4 4 7,5	50 4 5 10

Guarantee period of TWIN BT equipment is 1 year from the moment of putting the equipment into operation, but no more than 2 years from the delivery date (in case of proper storage).
Service life is no less than 10 years with technical assistance to be rendered by the supplier and routine maintenance of the basic components.
The duration of manufacture, assembly as well as start and adjustment work is equal to 9 – 12 months.
The equipment will come completed with passport for the machine, maintenance manual and set of spares.
The supplier will provide training to the Buyer’s technicians on how to operate the equipment. The scope and order of the training will be agreed separately.
Specific provisions, the dates of manufacture, assembly, adjustment and putting the equipment into operation as well as the cost and order of payments will be discussed by the partners and documented in relative paragraphs of the Contract.

ZAO “TWIN” is ready to answer any questions and perform the activities for delivery and commissioning of “TWIN ВT” equipment.

With all your questions please apply to FGUP “Licensintorg”, “Licensinservice” company.

Victor I.Kirichenko,
Director of “Licensinservice”

Phone: +7 (495) 797 63 60
e-mail: kir@licenz.ru

back

Site map